LD6-2 Lifting Davit 864mm arm

$1,560.00 $1,268.00

Category:

Description

LD6-2 Lifting Davit 863mm (34″) arm – Lifts to 90kg (200lb)               print instructions
Height 1625mm (64″)
Tube diameter 50mm

A quality lifting hoist with pivoting arm (almost 360 degrees) that can be folded and stored when not in use.
Haul heavy gear up to 90kg – dinghy, outboard, wheelchairs etc safely on deck. Other uses could be to haul goods up to a second level of your house!

Two piece construction with collapsible arm for easy stowing. Comes complete with 18m of 10mm line and all mounting hardware. Can be mounted inside or outside of pushpit railings.

The ball fitting (pictured on bottom of folded davit) is bolted through the deck to the ball fitting base plate. It allows you to have the Davit vertical irrespective of the camber. (There may be instances when you are not able to use the through deck fitting to attach the rotating ball. We would suggest you have a stainless plate or other supporting plate made to give a firm base to fix the rotating ball to – see below).
The 885mm overall length bottom stainless pole sits on it.
The bracket (can be horizontal or vertical) slips over the pole and attaches to a 25mm stanchion or railing to firmly secure the unit. (We do have 32mm clamps that can be modified to fit the bracket if you have 32mm stanchions).
The top pole with the folding arm and blocks on it is then placed on top. This can be left in position or folded and removed for easy stowage.

There are two ways to set the Lifting Davit up – worked from the deck or single handed from the dinghy.

 

 

You can also purchase an extra rotating ball, clamp and stainless pole if you want to lift from both the stern and the foredeck.

 

There may be instances when you are not able to use the through deck fitting to attach the rotating ball. We would suggest you have a stainless plate or other supporting plate made to give a firm base to fix the rotating ball to. You are also able to fit the Lifting Davit to cabin sides or other firm vertical structures
If you are interested in an outboard motor bridle (easily adjusted and strong) or a bag to store your Davit in ($75.00 each incl delivery). Email or ph 021474777 these people. They made some for their Garhauer Lifting Davit and thought others might be interested

Extra: freight to street address in New Zealand $10.00

Product unit weight grams: 6800 (15lb)